CREALITY SpacePi X4L Filament Dryer

3D printing requires properly prepared filament. Even a small amount of moisture can compromise print quality, cause air bubbles, or result in poor layer adhesion. The Creality SpacePi X4L Filament Dryer is designed to keep the material in optimal conditions before and during printing. The device uses smart sensors, temperature control, and an intuitive touchscreen panel, making filament drying simple and precise.

Smart Temperature and Humidity Sensors

The SpacePi X4L uses advanced sensors to monitor temperature and humidity inside the chamber. This allows the device to respond to even slight changes in parameters and maintain stable drying conditions. In practice, this means more uniform filament preparation, which translates to a more stable material flow during printing and better model quality.

LCD touchscreen with operation control

The device is operated via a clear LCD touchscreen. The new display design with an anti-static coating ensures good visibility even in cooler conditions. The panel allows you to quickly set the drying time and temperature, and the automatic mode selects the appropriate parameters on its own. You can also check the humidity level inside the device in real time on the screen.

Double insulation for safety

The dryer’s housing is equipped with a double layer of insulation that retains heat inside the chamber. The drying temperature can reach up to 75°C, yet the outer part of the housing remains significantly cooler—around 60°C. This allows the device to be safely operated even while in use.

Wide filament compatibility

The Creality SpacePi X4L supports most popular filaments used in 3D printing. The device is compatible with 1 kg or 2 kg spools and filaments with diameters of 1.75 mm and 2.85 mm. The chamber accommodates spools with a diameter of up to 200 mm and a width of up to 150 mm, making it compatible with many materials used in 3D printers.

Precise time and temperature control

The dryer allows you to set the temperature between 45 and 75°C and the operating time from 1 to 48 hours. This allows you to tailor the drying process to specific materials, such as PLA, PETG, TPU, or other filaments that require moisture removal before printing.

You can pay for goods in bm.market in the following ways: 

Credit card

credit card payment online

Legal entities / Self-employed persons (payment only by transfer):

Bank transfer - Payment is made on the previously received to your e-mail account. Upon receipt of the goods attached invoice and original invoice.

We will send your order by courier. The final cost of your order you will find out at registration.

_______________________________________________

Procedure for returning goods and cash:

You have the right to withdraw from the purchase within 14 (fourteen) days without giving any reason.

The withdrawal period ends 14 days after the day on which you or a third party indicated by you, who is not the carrier, acquires physical possession of the goods.

To exercise the right of withdrawal, please inform us: SIA “TehEksperts”, Krasta Street 89, Riga, LV-1019, phone: 27725222, e-mail: info@bm.lv (you may submit the withdrawal form or a free-form notice).

During the withdrawal period, you are entitled to use the goods only for inspection purposes (as in a store): to view visually, to check size; not to carry out manipulations (including not removing protective films, not activating software/OS, etc.).

If you withdraw from the contract, we will reimburse the purchase amount paid within 14 days from the receipt of your notice. Additional delivery costs for more expensive services (express, delivery at a specific time, etc.) will not be refunded.

The goods must be returned to the bm.market store, Krasta Street 89, Riga, without undue delay and no later than 14 days after your notice. When receiving shipments by express mail/courier, we may record the visual condition and completeness of the goods; a copy of the inspection report will be sent to your e-mail. If you request us to arrange a courier, this is done by a responsible person of bm.market; courier costs will be deducted from the refund (the amount depends on the location in Latvia).

The direct costs of returning the goods are borne by the buyer, unless we have agreed in writing beforehand to cover them.

You are responsible for any decrease in the value of the goods if they are used in ways other than necessary for inspection. The decrease in value is reasonably documented by an inspection report and photo/video.

Indicative examples of value reduction:
– Packaging only opened, full set, undamaged
– Damaged packaging (torn/wet), product unused
– Missing accessories/documentation
– Light signs of use (removed films, micro scratches)
– Visible signs of use (scratches, stains, hours of operation)
– Irreversibly personalized/activated (software/licenses)
– Hygiene products, once opened (CM No.255, 22.5.), are non-returnable

The right of withdrawal does not apply in cases specified in Clause 22 of Cabinet Regulation No.255 of 20.05.2014, including:
· the price of the goods depends on fluctuations in the financial market;
· the goods are made according to consumer specifications or personalized;
· the goods are perishable or have a short shelf life;
· the goods, due to their properties, after delivery become inseparably mixed with other items;
· opened packaging of goods that, for health/hygiene reasons, cannot be returned.

Note: For legal entities and self-employed persons, the commercial warranty is 1 year, and the 14-day right of withdrawal does not apply.