Anycubic Wash & Cure 3 Max: A Device for Washing and Curing 3D Prints
The Anycubic Wash & Cure 3 Max is an advanced device that combines washing and curing functions into a single process. It offers a large working capacity of up to 14.9 liters and a maximum cleaning area of 300 × 165 × 300 mm, allowing it to easily handle large models and most resin printers with a diagonal of up to 13.6 inches. With alcohol consumption of less than 50 ml per cycle and the ability to clean up to 20 models using a single 5-liter container, the device significantly reduces operating costs and streamlines the entire process.
Effective cleaning thanks to a dual-wash system
The use of two modes—spray and immersion—allows for the thorough removal of resin residue from both the model’s surface and hard-to-reach details. Mechanical liquid jets effectively reach every part of the print, while additional immersion rinsing removes residues trapped in recesses. This combination of methods results in more thorough cleaning while reducing alcohol consumption by over 50% compared to traditional solutions.
High compatibility and workspace
The device features a large 14.9-liter working chamber. It supports models up to 300 × 165 × 300 mm and build platforms up to 12 inches in size and weighing up to 2.2 kg. This makes it suitable for both large projects and batch processing of prints.
360° Curing
The automatically rotating curing platform ensures uniform exposure of models from all sides. A high curing energy of 25,000 µW/cm² and a wider exposure range allow for the effective and precise curing of even the most complex structures.
Process Automation
Device operation has been simplified to the maximum thanks to the One-click Washing and Curing feature. A single button press initiates the entire process, eliminating the need for manual handling of multiple steps. This solution significantly reduces processing time and minimizes user involvement, especially when printing large volumes.
Alcohol savings and lower operating costs
The device is designed for efficient use of isopropyl alcohol. Cleaning large models requires only about 4 liters of liquid, whereas traditional devices require up to 8.5 liters. Additionally, a single cycle consumes less than 50 ml of alcohol, significantly reducing costs and the frequency of cleaning solution replacement.
Convenient operation and error detection
The integrated flip-top lid allows for quick opening and closing, and the intuitive control panel ensures convenient operation at every stage of the process. The smart diagnostics system continuously monitors the device’s operation and alerts you to potential issues. The device signals, among other things, an open lid, low liquid levels, or a blocked drain.
Included
- Device for washing and curing prints
- Tray
- Detergent container x1
- Tank x1
- Water container x1
- Hoses x4
- Set of Allen wrenches
- Plastic scraper
- Replacement filter for the container
- User manual x1
- Power supply with power cord
| Manufacturer | Anycubic |
|---|---|
| Product name | Anycubic Wash & Cure 3 Max |
| Product code | WC3M-IP-O |
| Capacity | 14.9 L |
| Maximum model size | 300 × 165 × 300 mm |
| Alcohol consumption per cycle | <50 ml |
| Curing power | 25,000 µW/cm² |
| Device weight | 13.5 kg |
| Device dimensions | 434 x 434 x 556 mm |
General
| Brand | Anycubic |
Svars
|
Gross weight (kg)
Gross weight (kg): Параметр вес учитывается при расчёте доставки |
13.5 |
Warranty
| Warranty | 2 years |
You can pay for goods in bm.market in the following ways:
Credit card
credit card payment online
Legal entities / Self-employed persons (payment only by transfer):
Bank transfer - Payment is made on the previously received to your e-mail account. Upon receipt of the goods attached invoice and original invoice.
We will send your order by courier. The final cost of your order you will find out at registration.
_______________________________________________
Procedure for returning goods and cash:
You have the right to withdraw from the purchase within 14 (fourteen) days without giving any reason.
The withdrawal period ends 14 days after the day on which you or a third party indicated by you, who is not the carrier, acquires physical possession of the goods.
To exercise the right of withdrawal, please inform us: SIA “TehEksperts”, Krasta Street 89, Riga, LV-1019, phone: 27725222, e-mail: info@bm.lv (you may submit the withdrawal form or a free-form notice).
During the withdrawal period, you are entitled to use the goods only for inspection purposes (as in a store): to view visually, to check size; not to carry out manipulations (including not removing protective films, not activating software/OS, etc.).
If you withdraw from the contract, we will reimburse the purchase amount paid within 14 days from the receipt of your notice. Additional delivery costs for more expensive services (express, delivery at a specific time, etc.) will not be refunded.
The goods must be returned to the bm.market store, Krasta Street 89, Riga, without undue delay and no later than 14 days after your notice. When receiving shipments by express mail/courier, we may record the visual condition and completeness of the goods; a copy of the inspection report will be sent to your e-mail. If you request us to arrange a courier, this is done by a responsible person of bm.market; courier costs will be deducted from the refund (the amount depends on the location in Latvia).
The direct costs of returning the goods are borne by the buyer, unless we have agreed in writing beforehand to cover them.
You are responsible for any decrease in the value of the goods if they are used in ways other than necessary for inspection. The decrease in value is reasonably documented by an inspection report and photo/video.
Indicative examples of value reduction:
– Packaging only opened, full set, undamaged
– Damaged packaging (torn/wet), product unused
– Missing accessories/documentation
– Light signs of use (removed films, micro scratches)
– Visible signs of use (scratches, stains, hours of operation)
– Irreversibly personalized/activated (software/licenses)
– Hygiene products, once opened (CM No.255, 22.5.), are non-returnable
The right of withdrawal does not apply in cases specified in Clause 22 of Cabinet Regulation No.255 of 20.05.2014, including:
· the price of the goods depends on fluctuations in the financial market;
· the goods are made according to consumer specifications or personalized;
· the goods are perishable or have a short shelf life;
· the goods, due to their properties, after delivery become inseparably mixed with other items;
· opened packaging of goods that, for health/hygiene reasons, cannot be returned.
Note: For legal entities and self-employed persons, the commercial warranty is 1 year, and the 14-day right of withdrawal does not apply.
Anycubic Wash & Cure 3 Max: A Device for Washing and Curing 3D Prints
The Anycubic Wash & Cure 3 Max is an advanced device that combines washing and curing functions into a single process. It offers a large working capacity of up to 14.9 liters and a maximum cleaning area of 300 × 165 × 300 mm, allowing it to easily handle large models and most resin printers with a diagonal of up to 13.6 inches. With alcohol consumption of less than 50 ml per cycle and the ability to clean up to 20 models using a single 5-liter container, the device significantly reduces operating costs and streamlines the entire process.
Effective cleaning thanks to a dual-wash system
The use of two modes—spray and immersion—allows for the thorough removal of resin residue from both the model’s surface and hard-to-reach details. Mechanical liquid jets effectively reach every part of the print, while additional immersion rinsing removes residues trapped in recesses. This combination of methods results in more thorough cleaning while reducing alcohol consumption by over 50% compared to traditional solutions.
High compatibility and workspace
The device features a large 14.9-liter working chamber. It supports models up to 300 × 165 × 300 mm and build platforms up to 12 inches in size and weighing up to 2.2 kg. This makes it suitable for both large projects and batch processing of prints.
360° Curing
The automatically rotating curing platform ensures uniform exposure of models from all sides. A high curing energy of 25,000 µW/cm² and a wider exposure range allow for the effective and precise curing of even the most complex structures.
Process Automation
Device operation has been simplified to the maximum thanks to the One-click Washing and Curing feature. A single button press initiates the entire process, eliminating the need for manual handling of multiple steps. This solution significantly reduces processing time and minimizes user involvement, especially when printing large volumes.
Alcohol savings and lower operating costs
The device is designed for efficient use of isopropyl alcohol. Cleaning large models requires only about 4 liters of liquid, whereas traditional devices require up to 8.5 liters. Additionally, a single cycle consumes less than 50 ml of alcohol, significantly reducing costs and the frequency of cleaning solution replacement.
Convenient operation and error detection
The integrated flip-top lid allows for quick opening and closing, and the intuitive control panel ensures convenient operation at every stage of the process. The smart diagnostics system continuously monitors the device’s operation and alerts you to potential issues. The device signals, among other things, an open lid, low liquid levels, or a blocked drain.
Included
- Device for washing and curing prints
- Tray
- Detergent container x1
- Tank x1
- Water container x1
- Hoses x4
- Set of Allen wrenches
- Plastic scraper
- Replacement filter for the container
- User manual x1
- Power supply with power cord
| Manufacturer | Anycubic |
|---|---|
| Product name | Anycubic Wash & Cure 3 Max |
| Product code | WC3M-IP-O |
| Capacity | 14.9 L |
| Maximum model size | 300 × 165 × 300 mm |
| Alcohol consumption per cycle | <50 ml |
| Curing power | 25,000 µW/cm² |
| Device weight | 13.5 kg |
| Device dimensions | 434 x 434 x 556 mm |
General
| Brand | Anycubic |
Svars
|
Gross weight (kg)
Gross weight (kg): Параметр вес учитывается при расчёте доставки |
13.5 |
Warranty
| Warranty | 2 years |
You can pay for goods in bm.market in the following ways:
Credit card
credit card payment online
Legal entities / Self-employed persons (payment only by transfer):
Bank transfer - Payment is made on the previously received to your e-mail account. Upon receipt of the goods attached invoice and original invoice.
We will send your order by courier. The final cost of your order you will find out at registration.
_______________________________________________
Procedure for returning goods and cash:
You have the right to withdraw from the purchase within 14 (fourteen) days without giving any reason.
The withdrawal period ends 14 days after the day on which you or a third party indicated by you, who is not the carrier, acquires physical possession of the goods.
To exercise the right of withdrawal, please inform us: SIA “TehEksperts”, Krasta Street 89, Riga, LV-1019, phone: 27725222, e-mail: info@bm.lv (you may submit the withdrawal form or a free-form notice).
During the withdrawal period, you are entitled to use the goods only for inspection purposes (as in a store): to view visually, to check size; not to carry out manipulations (including not removing protective films, not activating software/OS, etc.).
If you withdraw from the contract, we will reimburse the purchase amount paid within 14 days from the receipt of your notice. Additional delivery costs for more expensive services (express, delivery at a specific time, etc.) will not be refunded.
The goods must be returned to the bm.market store, Krasta Street 89, Riga, without undue delay and no later than 14 days after your notice. When receiving shipments by express mail/courier, we may record the visual condition and completeness of the goods; a copy of the inspection report will be sent to your e-mail. If you request us to arrange a courier, this is done by a responsible person of bm.market; courier costs will be deducted from the refund (the amount depends on the location in Latvia).
The direct costs of returning the goods are borne by the buyer, unless we have agreed in writing beforehand to cover them.
You are responsible for any decrease in the value of the goods if they are used in ways other than necessary for inspection. The decrease in value is reasonably documented by an inspection report and photo/video.
Indicative examples of value reduction:
– Packaging only opened, full set, undamaged
– Damaged packaging (torn/wet), product unused
– Missing accessories/documentation
– Light signs of use (removed films, micro scratches)
– Visible signs of use (scratches, stains, hours of operation)
– Irreversibly personalized/activated (software/licenses)
– Hygiene products, once opened (CM No.255, 22.5.), are non-returnable
The right of withdrawal does not apply in cases specified in Clause 22 of Cabinet Regulation No.255 of 20.05.2014, including:
· the price of the goods depends on fluctuations in the financial market;
· the goods are made according to consumer specifications or personalized;
· the goods are perishable or have a short shelf life;
· the goods, due to their properties, after delivery become inseparably mixed with other items;
· opened packaging of goods that, for health/hygiene reasons, cannot be returned.
Note: For legal entities and self-employed persons, the commercial warranty is 1 year, and the 14-day right of withdrawal does not apply.
Here You can leave review or comment about product.
To leave review, You need to be registered!
Comment will be reviewed and only then it will shown on page.