Features:
The Pro version uses the new P12 Pro fans with a 7-blade design, which provide higher airflow and static pressure for improved cooling efficiency, especially at high loads.
The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
The Liquid Freezer III Pro is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
Two connection cables provide two control options: this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting. Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
ARCTIC's new A-RGB fans allow for perfectly matched, multi-color lighting effects. With the help of the advanced A-RGB technology and customizable LEDs, you can design your system with your very own look.
Note: Some motherboards are incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. You can check compatibility here: https://support.arctic.de/lf3-compatibility.
Arctic relies on the P12 Pro fans for better results:
Higher static pressure increases cooling efficiency.
Extended RPM range.
More performance at any speed.
Longer service life.
PWM for synchronous fan control.
High quality bearing.
A-RGB lighting effects.
Specifications:
Pump speed: 800 - 2800 RPM.
Pump voltage/ current: 12V DC/ 0.35A.
Plate material: copper.
Tube length: 450mm.
Tube diameter: outer 12.4 mm, inner 6.0 mm.
VRM fan speed: 400-2500 RPM.
VRM voltage/ current: 12V DC/ 0.05A.
Thermal paste: MX-6 (0.8g).
Fan: 2x P12 Pro.
Fan speed: 600-3000 RPM.
Air flow: 77 CFM / 131 m³/h.
Static pressure: 6.9 mm H2O.
Connector: 4-Pin PWM.
Bearing: Fluid dynamic bearing.
Fan voltage/ current: 12V DC/ 0.33A.
Dimensions: 277x120x38mm.
Weight: 1675g.
LED: 12x A-RGB Gen2 Leds.
RGB voltage/ current: 5V DC/ 0.40A.
Color: white body, optional lighting.
Compatibility:
AMD AM4.
AMD AM5.
Intel LGA1851.
Intel LGA1700.
Intel 1700.
Warranty: 6 years.
Svars
|
Gross weight (kg)
Gross weight (kg): Параметр вес учитывается при расчёте доставки |
1 |
You can pay for goods in bm.market in the following ways:
Credit card
credit card payment online
Legal entities / Self-employed persons (payment only by transfer):
Bank transfer - Payment is made on the previously received to your e-mail account. Upon receipt of the goods attached invoice and original invoice.
We will send your order by courier. The final cost of your order you will find out at registration.
_______________________________________________
Procedure for returning goods and cash:
You have the right to withdraw from the purchase within 14 (fourteen) days without giving any reason.
The withdrawal period ends 14 days after the day on which you or a third party indicated by you, who is not the carrier, acquires physical possession of the goods.
To exercise the right of withdrawal, please inform us: SIA “TehEksperts”, Krasta Street 89, Riga, LV-1019, phone: 27725222, e-mail: info@bm.lv (you may submit the withdrawal form or a free-form notice).
During the withdrawal period, you are entitled to use the goods only for inspection purposes (as in a store): to view visually, to check size; not to carry out manipulations (including not removing protective films, not activating software/OS, etc.).
If you withdraw from the contract, we will reimburse the purchase amount paid within 14 days from the receipt of your notice. Additional delivery costs for more expensive services (express, delivery at a specific time, etc.) will not be refunded.
The goods must be returned to the bm.market store, Krasta Street 89, Riga, without undue delay and no later than 14 days after your notice. When receiving shipments by express mail/courier, we may record the visual condition and completeness of the goods; a copy of the inspection report will be sent to your e-mail. If you request us to arrange a courier, this is done by a responsible person of bm.market; courier costs will be deducted from the refund (the amount depends on the location in Latvia).
The direct costs of returning the goods are borne by the buyer, unless we have agreed in writing beforehand to cover them.
You are responsible for any decrease in the value of the goods if they are used in ways other than necessary for inspection. The decrease in value is reasonably documented by an inspection report and photo/video.
Indicative examples of value reduction:
– Packaging only opened, full set, undamaged
– Damaged packaging (torn/wet), product unused
– Missing accessories/documentation
– Light signs of use (removed films, micro scratches)
– Visible signs of use (scratches, stains, hours of operation)
– Irreversibly personalized/activated (software/licenses)
– Hygiene products, once opened (CM No.255, 22.5.), are non-returnable
The right of withdrawal does not apply in cases specified in Clause 22 of Cabinet Regulation No.255 of 20.05.2014, including:
· the price of the goods depends on fluctuations in the financial market;
· the goods are made according to consumer specifications or personalized;
· the goods are perishable or have a short shelf life;
· the goods, due to their properties, after delivery become inseparably mixed with other items;
· opened packaging of goods that, for health/hygiene reasons, cannot be returned.
Note: For legal entities and self-employed persons, the commercial warranty is 1 year, and the 14-day right of withdrawal does not apply.
Features:
The Pro version uses the new P12 Pro fans with a 7-blade design, which provide higher airflow and static pressure for improved cooling efficiency, especially at high loads.
The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.
The Liquid Freezer III Pro is equipped with a specially developed PWM-controlled water pump, which has been further optimised in terms of both performance and noise. Thanks to the improved coldplate with an extended fin surface and optimised water pipes, the Liquid Freezer III increases its performance while maintaining quiet operation.
Two connection cables provide two control options: this allows the entire unit to be controlled via a single connection, whereby the speed of the radiator fans is output. The pump, VRM and radiator fans can therefore be easily controlled via a single PWM setting. Separate regulation: By using the splitter cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the speed of the VRM fan to be controlled independently of the CPU and to be adjusted analogue to the temperature of the voltage converters via PWM.
ARCTIC's new A-RGB fans allow for perfectly matched, multi-color lighting effects. With the help of the advanced A-RGB technology and customizable LEDs, you can design your system with your very own look.
Note: Some motherboards are incompatible with the Liquid Freezer III Pro due to oversized SSD coolers in the M.2_1 slot. You can check compatibility here: https://support.arctic.de/lf3-compatibility.
Arctic relies on the P12 Pro fans for better results:
Higher static pressure increases cooling efficiency.
Extended RPM range.
More performance at any speed.
Longer service life.
PWM for synchronous fan control.
High quality bearing.
A-RGB lighting effects.
Specifications:
Pump speed: 800 - 2800 RPM.
Pump voltage/ current: 12V DC/ 0.35A.
Plate material: copper.
Tube length: 450mm.
Tube diameter: outer 12.4 mm, inner 6.0 mm.
VRM fan speed: 400-2500 RPM.
VRM voltage/ current: 12V DC/ 0.05A.
Thermal paste: MX-6 (0.8g).
Fan: 2x P12 Pro.
Fan speed: 600-3000 RPM.
Air flow: 77 CFM / 131 m³/h.
Static pressure: 6.9 mm H2O.
Connector: 4-Pin PWM.
Bearing: Fluid dynamic bearing.
Fan voltage/ current: 12V DC/ 0.33A.
Dimensions: 277x120x38mm.
Weight: 1675g.
LED: 12x A-RGB Gen2 Leds.
RGB voltage/ current: 5V DC/ 0.40A.
Color: white body, optional lighting.
Compatibility:
AMD AM4.
AMD AM5.
Intel LGA1851.
Intel LGA1700.
Intel 1700.
Warranty: 6 years.
Svars
|
Gross weight (kg)
Gross weight (kg): Параметр вес учитывается при расчёте доставки |
1 |
You can pay for goods in bm.market in the following ways:
Credit card
credit card payment online
Legal entities / Self-employed persons (payment only by transfer):
Bank transfer - Payment is made on the previously received to your e-mail account. Upon receipt of the goods attached invoice and original invoice.
We will send your order by courier. The final cost of your order you will find out at registration.
_______________________________________________
Procedure for returning goods and cash:
You have the right to withdraw from the purchase within 14 (fourteen) days without giving any reason.
The withdrawal period ends 14 days after the day on which you or a third party indicated by you, who is not the carrier, acquires physical possession of the goods.
To exercise the right of withdrawal, please inform us: SIA “TehEksperts”, Krasta Street 89, Riga, LV-1019, phone: 27725222, e-mail: info@bm.lv (you may submit the withdrawal form or a free-form notice).
During the withdrawal period, you are entitled to use the goods only for inspection purposes (as in a store): to view visually, to check size; not to carry out manipulations (including not removing protective films, not activating software/OS, etc.).
If you withdraw from the contract, we will reimburse the purchase amount paid within 14 days from the receipt of your notice. Additional delivery costs for more expensive services (express, delivery at a specific time, etc.) will not be refunded.
The goods must be returned to the bm.market store, Krasta Street 89, Riga, without undue delay and no later than 14 days after your notice. When receiving shipments by express mail/courier, we may record the visual condition and completeness of the goods; a copy of the inspection report will be sent to your e-mail. If you request us to arrange a courier, this is done by a responsible person of bm.market; courier costs will be deducted from the refund (the amount depends on the location in Latvia).
The direct costs of returning the goods are borne by the buyer, unless we have agreed in writing beforehand to cover them.
You are responsible for any decrease in the value of the goods if they are used in ways other than necessary for inspection. The decrease in value is reasonably documented by an inspection report and photo/video.
Indicative examples of value reduction:
– Packaging only opened, full set, undamaged
– Damaged packaging (torn/wet), product unused
– Missing accessories/documentation
– Light signs of use (removed films, micro scratches)
– Visible signs of use (scratches, stains, hours of operation)
– Irreversibly personalized/activated (software/licenses)
– Hygiene products, once opened (CM No.255, 22.5.), are non-returnable
The right of withdrawal does not apply in cases specified in Clause 22 of Cabinet Regulation No.255 of 20.05.2014, including:
· the price of the goods depends on fluctuations in the financial market;
· the goods are made according to consumer specifications or personalized;
· the goods are perishable or have a short shelf life;
· the goods, due to their properties, after delivery become inseparably mixed with other items;
· opened packaging of goods that, for health/hygiene reasons, cannot be returned.
Note: For legal entities and self-employed persons, the commercial warranty is 1 year, and the 14-day right of withdrawal does not apply.
Here You can leave review or comment about product.
To leave review, You need to be registered!
Comment will be reviewed and only then it will shown on page.