When a DJI Power-series power station is connected to the DJI Power Solar Panel Adapter Module (MPPT), users can link solar panels through the XT60 interface on the adapter panel for eco-friendly recharging of the DJI Power series. It is recommended to use the DJI Power-series power stations in conjunction with solar panels from the DJI-certified brand Zignes. If using solar panels from other brands, using the MPPT module and a conversion of the solar panel port to the XT60 interface are necessary to enable solar recharging for the DJI Power series.
* Required accessories are sold separately.
1. One MPPT module can connect to up to three solar panels.
2. To use solar panels not officially recommended by DJI, and to prevent damage to the MPPT module and the power station, ensure the open-circuit voltage of the solar panel is less than 30 V. The power output of each solar panel should not exceed 200 W, with the total output power of solar panels connected to the entire MPPT module capped at 400 W.
3. While using solar panels with the MPPT module, install the included metal heat dissipation bracket.
4. When used with the DJI Power 500, the max output power of the solar panels connected to the entire adapter module should not exceed 300 W.
DJI Power Solar Panel Adapter Module (MPPT) × 1
Metal Heat Dissipation Bracket × 2
Ball-End Hey Key × 1
10mm Screw × 3
20mm Screw × 3
Total Output:
Single Channel:
Max 200 W
Triple Channels:
Max 400 W (with DJI Power 1000)
Max 300 W (with DJI Power 500)
Input Voltage: 12-30 V, DC
Max Input Current:
Single Channel: 10 A
Triple Channels: 16 A
Operating Temperature: -10° to 45° C (41° to 113° F)
DJI Power 1000
DJI Power 500
General
| Brand | DJI |
Svars
|
Gross weight (kg)
Gross weight (kg): Параметр вес учитывается при расчёте доставки |
1 |
Warranty
| Warranty | 2 years |
You can pay for goods in bm.market in the following ways:
Credit card
credit card payment online
Legal entities / Self-employed persons (payment only by transfer):
Bank transfer - Payment is made on the previously received to your e-mail account. Upon receipt of the goods attached invoice and original invoice.
We will send your order by courier. The final cost of your order you will find out at registration.
_______________________________________________
Procedure for returning goods and cash:
- You have the right to cancel the contract within fourteen (14) days without giving reasons.
- The right to refuse will end after 14 days from the date when you or a third party purchases the goods, with the exception of the carrier and the person you indicated, received the goods in possession.
- In order to use the right of withdrawal, you must inform us (for example, by mail or e-mail) SIA "TehEksperts", address Krasta iela 89, Riga, LV-1019, phone number +442 045770771, email address info@bm.lv using the sample.
- In order for the term of the right to refuse to be respected, it is enough if you send your notice of the use of the right to cancel before the end of the term of the right to cancel.
- If you withdraw from the contract, we will refund all payments received from you, in turn transport costs (excluding additional costs that arose as a result of choosing a delivery method), without undue delay and in any case no later than 14 days from the date when we were informed about your decision to withdraw from the contract.
- During the use of the right of withdrawal, you can use the product for as long as necessary to check the product (just as you can do before purchasing the product in a regular store, for example, for laptop computers, familiarize yourself with the appearance of the computer, size, but not manipulations, including activation of a pre-installed operating system, mobile phones - without removing protective films, including without inserting a SIM card and making calls, without synchronizing data, etc.).
- You are responsible for maintaining the quality and safety of the goods during the period of implementation of the right to refuse.
- You must reimburse the costs associated with reducing the cost of the goods, if the goods were used for other purposes, not to familiarize themselves with the features and operation of the goods, which can be confirmed by the diagnosis of the goods in the manufacturer's authorized service center.
When a DJI Power-series power station is connected to the DJI Power Solar Panel Adapter Module (MPPT), users can link solar panels through the XT60 interface on the adapter panel for eco-friendly recharging of the DJI Power series. It is recommended to use the DJI Power-series power stations in conjunction with solar panels from the DJI-certified brand Zignes. If using solar panels from other brands, using the MPPT module and a conversion of the solar panel port to the XT60 interface are necessary to enable solar recharging for the DJI Power series.
* Required accessories are sold separately.
1. One MPPT module can connect to up to three solar panels.
2. To use solar panels not officially recommended by DJI, and to prevent damage to the MPPT module and the power station, ensure the open-circuit voltage of the solar panel is less than 30 V. The power output of each solar panel should not exceed 200 W, with the total output power of solar panels connected to the entire MPPT module capped at 400 W.
3. While using solar panels with the MPPT module, install the included metal heat dissipation bracket.
4. When used with the DJI Power 500, the max output power of the solar panels connected to the entire adapter module should not exceed 300 W.
DJI Power Solar Panel Adapter Module (MPPT) × 1
Metal Heat Dissipation Bracket × 2
Ball-End Hey Key × 1
10mm Screw × 3
20mm Screw × 3
Total Output:
Single Channel:
Max 200 W
Triple Channels:
Max 400 W (with DJI Power 1000)
Max 300 W (with DJI Power 500)
Input Voltage: 12-30 V, DC
Max Input Current:
Single Channel: 10 A
Triple Channels: 16 A
Operating Temperature: -10° to 45° C (41° to 113° F)
DJI Power 1000
DJI Power 500
General
| Brand | DJI |
Svars
|
Gross weight (kg)
Gross weight (kg): Параметр вес учитывается при расчёте доставки |
1 |
Warranty
| Warranty | 2 years |
You can pay for goods in bm.market in the following ways:
Credit card
credit card payment online
Legal entities / Self-employed persons (payment only by transfer):
Bank transfer - Payment is made on the previously received to your e-mail account. Upon receipt of the goods attached invoice and original invoice.
We will send your order by courier. The final cost of your order you will find out at registration.
_______________________________________________
Procedure for returning goods and cash:
- You have the right to cancel the contract within fourteen (14) days without giving reasons.
- The right to refuse will end after 14 days from the date when you or a third party purchases the goods, with the exception of the carrier and the person you indicated, received the goods in possession.
- In order to use the right of withdrawal, you must inform us (for example, by mail or e-mail) SIA "TehEksperts", address Krasta iela 89, Riga, LV-1019, phone number +442 045770771, email address info@bm.lv using the sample.
- In order for the term of the right to refuse to be respected, it is enough if you send your notice of the use of the right to cancel before the end of the term of the right to cancel.
- If you withdraw from the contract, we will refund all payments received from you, in turn transport costs (excluding additional costs that arose as a result of choosing a delivery method), without undue delay and in any case no later than 14 days from the date when we were informed about your decision to withdraw from the contract.
- During the use of the right of withdrawal, you can use the product for as long as necessary to check the product (just as you can do before purchasing the product in a regular store, for example, for laptop computers, familiarize yourself with the appearance of the computer, size, but not manipulations, including activation of a pre-installed operating system, mobile phones - without removing protective films, including without inserting a SIM card and making calls, without synchronizing data, etc.).
- You are responsible for maintaining the quality and safety of the goods during the period of implementation of the right to refuse.
- You must reimburse the costs associated with reducing the cost of the goods, if the goods were used for other purposes, not to familiarize themselves with the features and operation of the goods, which can be confirmed by the diagnosis of the goods in the manufacturer's authorized service center.
Here You can leave review or comment about product.
To leave review, You need to be registered!
Comment will be reviewed and only then it will shown on page.