• +442 045 770 771
  • +442 045 770 771
  • Search in all categories
  • Discounts
  • Computers
  • Mobile phones
  • Tablets
  • Appliances
  • Plumbing
  • Photo and Video equipment
  • Watches
  • TV, Audio, Video
  • Game consoles and games
  • Car/Moto
  • Medical supplies and accessories
  • Home & Garden
  • Furniture
  • Sport and Tourism
  • Children and babies
  • Zoo goods
  • Perfumes and cosmetics
  • Neapstrādātās preces
Item catalogue
0 qt. 0.00
Compare item
Caruba Extension Tube Set Nikon 1-Serie Chroom
Art.: 587281
76.00
total:
76.00
+
-
Caruba Extension Tube set Nikon 1-Series Chrome
The Caruba Extension Tube set for Nikon consists of three extension tubes that can be used separately, or combined. The extension tubes do not have any optical elements, which makes it possible to photograph subjects larger and from a closer distance, without changing the quality of the image. The extension tubes have a chrome base and are compatible with Nikon 1-series lenses. Features such as auto focus and TTL light metering continue to work as usual. However, manual focusing is recommended, as focus is very tight.
 
Ideal for macro photography
Every lens has a minimum focusing distance. If you put an extension tube, or so called spacer ring, between the lens and the camera body, the minimum focusing distance becomes smaller. The greater the focal length of the extension tube, the closer you can get. This is perfect for macro photography or for creating special close-ups.
 
How does a spacer work?
A spacer ring increases the distance between the image sensor of the camera and the rear lens of the lens. This shortens the focusing distance of the lens, making it possible to focus closer on the subject. As a result, the subject is projected onto the sensor larger than it would be without a spacer ring. A spacer ring thus increases the magnification factor of a lens. This can be calculated using the following formula.
 
Maximum magnification with spacer ring = lens magnification factor + (mm spacer ring / focal length) 
 
Examples
For example you have an 85mm lens with a magnification factor of 0.13. With the 12mm ring the magnification of the lens becomes as follows:
maximum magnification with 12mm ring = 0.13 + (12 / 85) = 0.13 + 0.14 = 0.22
 
With the 20mm spacer ring, the magnification factor of the lens becomes as follows:
Maximum magnification with 20mm ring = 0.13 + (20 / 85) = 0.13 + 0.24 = 0.37
 
With the 36mm spacer ring, the magnification ratio of the lens is as follows:
maximum magnification with 36mm ring = 0.13 + (36 / 85) = 0.13 + 0.42 = 0.55
 
You can also combine the spacer rings, with all three the magnification factor of the lens becomes as follows:
maximum magnification with 68mm ring = 0.13 + (68 / 85) = 0.13 + 0.80 = 0.93
 
Please note that when using all 3 stacked spacer rings there is a loss of light of approximately 2 stops

 

Characteristics

 

  • Set of three extension tubes
  • Perfect for macro photography and close-ups
  • Get closer to your subject and capture it larger
  • Reduce the minimum focus distance of your lens
  • Autofocus and TTL light metering function
  • No change in the quality of your images
  • Compatible with Nikon 1 series lenses
  • Chrome mount

In the box

 

  • 1 x Extension tube 10mm
  • 1 x Extension tube 16mm
  • 1 x Extension tube 21mm
  • 1 x Lens cap

General

Brand Caruba

Svars

Gross weight (kg) Gross weight (kg):
Параметр вес учитывается при расчёте доставки
1

Warranty

Warranty 2 years

You can pay for goods in bm.market in the following ways: 

 

Credit card

credit card payment online

 

 

Legal entities / Self-employed persons (payment only by transfer):

Bank transfer - Payment is made on the previously received to your e-mail account. Upon receipt of the goods attached invoice and original invoice.

 

We will send your order by courier. The final cost of your order you will find out at registration.

_______________________________________________


Procedure for returning goods and cash:

You have the right to withdraw from the purchase within 14 (fourteen) days without giving any reason.

The withdrawal period ends 14 days after the day on which you or a third party indicated by you, who is not the carrier, acquires physical possession of the goods.

To exercise the right of withdrawal, please inform us: SIA “TehEksperts”, Krasta Street 89, Riga, LV-1019, phone: 27725222, e-mail: info@bm.lv (you may submit the withdrawal form or a free-form notice).

During the withdrawal period, you are entitled to use the goods only for inspection purposes (as in a store): to view visually, to check size; not to carry out manipulations (including not removing protective films, not activating software/OS, etc.).

If you withdraw from the contract, we will reimburse the purchase amount paid within 14 days from the receipt of your notice. Additional delivery costs for more expensive services (express, delivery at a specific time, etc.) will not be refunded.

The goods must be returned to the bm.market store, Krasta Street 89, Riga, without undue delay and no later than 14 days after your notice. When receiving shipments by express mail/courier, we may record the visual condition and completeness of the goods; a copy of the inspection report will be sent to your e-mail. If you request us to arrange a courier, this is done by a responsible person of bm.market; courier costs will be deducted from the refund (the amount depends on the location in Latvia).

The direct costs of returning the goods are borne by the buyer, unless we have agreed in writing beforehand to cover them.

You are responsible for any decrease in the value of the goods if they are used in ways other than necessary for inspection. The decrease in value is reasonably documented by an inspection report and photo/video.

Indicative examples of value reduction:
– Packaging only opened, full set, undamaged
– Damaged packaging (torn/wet), product unused
– Missing accessories/documentation
– Light signs of use (removed films, micro scratches)
– Visible signs of use (scratches, stains, hours of operation)
– Irreversibly personalized/activated (software/licenses)
– Hygiene products, once opened (CM No.255, 22.5.), are non-returnable

The right of withdrawal does not apply in cases specified in Clause 22 of Cabinet Regulation No.255 of 20.05.2014, including:
· the price of the goods depends on fluctuations in the financial market;
· the goods are made according to consumer specifications or personalized;
· the goods are perishable or have a short shelf life;
· the goods, due to their properties, after delivery become inseparably mixed with other items;
· opened packaging of goods that, for health/hygiene reasons, cannot be returned.

Note: For legal entities and self-employed persons, the commercial warranty is 1 year, and the 14-day right of withdrawal does not apply.

Write a review

Here You can leave review or comment about product.
To leave review, You need to be registered!

Comment will be reviewed and only then it will shown on page.

Description
Caruba Extension Tube set Nikon 1-Series Chrome
The Caruba Extension Tube set for Nikon consists of three extension tubes that can be used separately, or combined. The extension tubes do not have any optical elements, which makes it possible to photograph subjects larger and from a closer distance, without changing the quality of the image. The extension tubes have a chrome base and are compatible with Nikon 1-series lenses. Features such as auto focus and TTL light metering continue to work as usual. However, manual focusing is recommended, as focus is very tight.
 
Ideal for macro photography
Every lens has a minimum focusing distance. If you put an extension tube, or so called spacer ring, between the lens and the camera body, the minimum focusing distance becomes smaller. The greater the focal length of the extension tube, the closer you can get. This is perfect for macro photography or for creating special close-ups.
 
How does a spacer work?
A spacer ring increases the distance between the image sensor of the camera and the rear lens of the lens. This shortens the focusing distance of the lens, making it possible to focus closer on the subject. As a result, the subject is projected onto the sensor larger than it would be without a spacer ring. A spacer ring thus increases the magnification factor of a lens. This can be calculated using the following formula.
 
Maximum magnification with spacer ring = lens magnification factor + (mm spacer ring / focal length) 
 
Examples
For example you have an 85mm lens with a magnification factor of 0.13. With the 12mm ring the magnification of the lens becomes as follows:
maximum magnification with 12mm ring = 0.13 + (12 / 85) = 0.13 + 0.14 = 0.22
 
With the 20mm spacer ring, the magnification factor of the lens becomes as follows:
Maximum magnification with 20mm ring = 0.13 + (20 / 85) = 0.13 + 0.24 = 0.37
 
With the 36mm spacer ring, the magnification ratio of the lens is as follows:
maximum magnification with 36mm ring = 0.13 + (36 / 85) = 0.13 + 0.42 = 0.55
 
You can also combine the spacer rings, with all three the magnification factor of the lens becomes as follows:
maximum magnification with 68mm ring = 0.13 + (68 / 85) = 0.13 + 0.80 = 0.93
 
Please note that when using all 3 stacked spacer rings there is a loss of light of approximately 2 stops

 

Characteristics

 

  • Set of three extension tubes
  • Perfect for macro photography and close-ups
  • Get closer to your subject and capture it larger
  • Reduce the minimum focus distance of your lens
  • Autofocus and TTL light metering function
  • No change in the quality of your images
  • Compatible with Nikon 1 series lenses
  • Chrome mount

In the box

 

  • 1 x Extension tube 10mm
  • 1 x Extension tube 16mm
  • 1 x Extension tube 21mm
  • 1 x Lens cap
Specifications
Shipping and payment

The history of your views