The KESS3 has been designed to provide a quick and easy interface to any engine control unit and automatic transmission on the market, from young engine enthusiasts to the most specialized mechatronics technicians.
KESS3 combines 3 operating modes in one tool - OBD, bench and boot mode.
- OBD mode - Easily access all ECU data through the diagnostic socket.
- BENCH mode is a simple interface for logging in and you have full access to your ECU data.
- BOOT mode - This mode allows access to all areas of system data. Read, write and clone.
Configure KESS3 to suit your needs and your work. Regardless of your level and experience, KESS3 gives you the best experience in engine programming.
Suitcase set:
USB cable required to interface with KESS3 via PC
A new generation OBD cable that integrates all the communication lines used by various car manufacturers, so this cable replaces the various cables used by KESSv2. Specifically, it can also communicate with Honda, Volvo, Lotus and Toyota without any additional adapters.
1400SWALIM power supply capable of supplying sufficient current and voltage to communicate stably and securely with electronic control units.
144300TALI cable for powering the device using a BENCH power supply (sold separately)
144300KBNC cable for connection to control units using BENCH mode.
144300KTER kit with all cables required for connection in BENCH or BOOT mode.
144300T104 ribbon cable IDC 26-10, consisting of 10 wires. Used to connect directly to the control unit board.
144300T105 ribbon cable IDC 26-16, consisting of 16 wires. Used to connect directly to the control unit board.
144300T106 ribbon cable IDC 26-26 consisting of 26 wires. Used to connect directly to the control unit board.
General parameters
| Manufacturer | Alientech |
Svars
|
Gross weight (kg)
Gross weight (kg): Параметр вес учитывается при расчёте доставки |
5 |
Warranty
| Warranty | 2 years |
You can pay for goods in bm.market in the following ways:
Credit card
credit card payment online
Legal entities / Self-employed persons (payment only by transfer):
Bank transfer - Payment is made on the previously received to your e-mail account. Upon receipt of the goods attached invoice and original invoice.
We will send your order by courier. The final cost of your order you will find out at registration.
_______________________________________________
Procedure for returning goods and cash:
- You have the right to cancel the contract within fourteen (14) days without giving reasons.
- The right to refuse will end after 14 days from the date when you or a third party purchases the goods, with the exception of the carrier and the person you indicated, received the goods in possession.
- In order to use the right of withdrawal, you must inform us (for example, by mail or e-mail) SIA "TehEksperts", address Krasta iela 89, Riga, LV-1019, phone number +442 045770771, email address info@bm.lv using the sample.
- In order for the term of the right to refuse to be respected, it is enough if you send your notice of the use of the right to cancel before the end of the term of the right to cancel.
- If you withdraw from the contract, we will refund all payments received from you, in turn transport costs (excluding additional costs that arose as a result of choosing a delivery method), without undue delay and in any case no later than 14 days from the date when we were informed about your decision to withdraw from the contract.
- During the use of the right of withdrawal, you can use the product for as long as necessary to check the product (just as you can do before purchasing the product in a regular store, for example, for laptop computers, familiarize yourself with the appearance of the computer, size, but not manipulations, including activation of a pre-installed operating system, mobile phones - without removing protective films, including without inserting a SIM card and making calls, without synchronizing data, etc.).
- You are responsible for maintaining the quality and safety of the goods during the period of implementation of the right to refuse.
- You must reimburse the costs associated with reducing the cost of the goods, if the goods were used for other purposes, not to familiarize themselves with the features and operation of the goods, which can be confirmed by the diagnosis of the goods in the manufacturer's authorized service center.
The KESS3 has been designed to provide a quick and easy interface to any engine control unit and automatic transmission on the market, from young engine enthusiasts to the most specialized mechatronics technicians.
KESS3 combines 3 operating modes in one tool - OBD, bench and boot mode.
- OBD mode - Easily access all ECU data through the diagnostic socket.
- BENCH mode is a simple interface for logging in and you have full access to your ECU data.
- BOOT mode - This mode allows access to all areas of system data. Read, write and clone.
Configure KESS3 to suit your needs and your work. Regardless of your level and experience, KESS3 gives you the best experience in engine programming.
Suitcase set:
USB cable required to interface with KESS3 via PC
A new generation OBD cable that integrates all the communication lines used by various car manufacturers, so this cable replaces the various cables used by KESSv2. Specifically, it can also communicate with Honda, Volvo, Lotus and Toyota without any additional adapters.
1400SWALIM power supply capable of supplying sufficient current and voltage to communicate stably and securely with electronic control units.
144300TALI cable for powering the device using a BENCH power supply (sold separately)
144300KBNC cable for connection to control units using BENCH mode.
144300KTER kit with all cables required for connection in BENCH or BOOT mode.
144300T104 ribbon cable IDC 26-10, consisting of 10 wires. Used to connect directly to the control unit board.
144300T105 ribbon cable IDC 26-16, consisting of 16 wires. Used to connect directly to the control unit board.
144300T106 ribbon cable IDC 26-26 consisting of 26 wires. Used to connect directly to the control unit board.
General parameters
| Manufacturer | Alientech |
Svars
|
Gross weight (kg)
Gross weight (kg): Параметр вес учитывается при расчёте доставки |
5 |
Warranty
| Warranty | 2 years |
You can pay for goods in bm.market in the following ways:
Credit card
credit card payment online
Legal entities / Self-employed persons (payment only by transfer):
Bank transfer - Payment is made on the previously received to your e-mail account. Upon receipt of the goods attached invoice and original invoice.
We will send your order by courier. The final cost of your order you will find out at registration.
_______________________________________________
Procedure for returning goods and cash:
- You have the right to cancel the contract within fourteen (14) days without giving reasons.
- The right to refuse will end after 14 days from the date when you or a third party purchases the goods, with the exception of the carrier and the person you indicated, received the goods in possession.
- In order to use the right of withdrawal, you must inform us (for example, by mail or e-mail) SIA "TehEksperts", address Krasta iela 89, Riga, LV-1019, phone number +442 045770771, email address info@bm.lv using the sample.
- In order for the term of the right to refuse to be respected, it is enough if you send your notice of the use of the right to cancel before the end of the term of the right to cancel.
- If you withdraw from the contract, we will refund all payments received from you, in turn transport costs (excluding additional costs that arose as a result of choosing a delivery method), without undue delay and in any case no later than 14 days from the date when we were informed about your decision to withdraw from the contract.
- During the use of the right of withdrawal, you can use the product for as long as necessary to check the product (just as you can do before purchasing the product in a regular store, for example, for laptop computers, familiarize yourself with the appearance of the computer, size, but not manipulations, including activation of a pre-installed operating system, mobile phones - without removing protective films, including without inserting a SIM card and making calls, without synchronizing data, etc.).
- You are responsible for maintaining the quality and safety of the goods during the period of implementation of the right to refuse.
- You must reimburse the costs associated with reducing the cost of the goods, if the goods were used for other purposes, not to familiarize themselves with the features and operation of the goods, which can be confirmed by the diagnosis of the goods in the manufacturer's authorized service center.
Here You can leave review or comment about product.
To leave review, You need to be registered!
Comment will be reviewed and only then it will shown on page.