DJI Mic 3 Receiver

• Receiver for DJI Mic 3 Microphone System
• 4TX + 8RX support and four-channel output
• Adaptive gain control for balanced volume
• Dual-file 32-bit float internal recording
• Three voice processing presets, two-level noise reduction
• Integrated timecode for smooth editing
• Dual-frequency interference immunity, lossless audio transmission
• Extended operating time and fast charging

Easy control, smooth operation
The receiver has a 1.1-inch AMOLED touchscreen and rotary knob, which allow you to quickly adjust the volume, select modes and check the battery level.

You can adjust settings and update firmware directly from your phone through the DJI Mimo app. Fast, convenient and easy.

Superior Sound, Smarter Experience

• Adaptive Gain Control for Balanced Volume: Auto/Dynamic
• Three Voice Processing Presets for Your Style: Normal/Rich/Bright
• Two-Level Noise Cancellation for Focused Sound: Standard/Strong

Endless Possibilities
Up to four transmitters can be connected to the DJI Mic 3 receiver to record four audio sources simultaneously. Up to seven additional receivers can be synchronized with the main receiver. Ideal for group interviews or multi-camera shoots – get crystal-clear audio from each device, making post-production easier.

Flexible Channel Management
Choose mono or stereo mode – record each transmitter’s audio separately or combine them into a single track, depending on your creative needs.

Four-Channel Output, Easier Post-Production
In Quadraphonic mode, the DJI Mic 3 receiver – with select Sony cameras or software – can output four separate audio tracks. This allows for more precise audio separation and mixing, giving you more freedom in post-production.

Dual frequencies ensure reliability
DJI Mic 3 automatically switches between 2.4 GHz and 5 GHz frequencies and provides a range of up to 400 meters. Strong interference immunity keeps the sound stable even in challenging environments, such as trade shows.

Lossless transmission, pure sound
In lossless audio mode, the transmitter transmits uncompressed 48 kHz 24-bit audio directly to the receiver. Every recording is captured in detail and high quality.

Built-in recording
Don't worry about lost audio - internal recording protects your recording in the event of interference or device failure. Dual-file recording simultaneously stores both the original audio and the algorithm-processed version, for a smooth workflow and unhindered creative process.

32-bit float internal recording
DJI Mic 3 supports 32-bit float recording, which provides a wide dynamic range. It captures both faint whispers and loud sounds, making recordings reliable even in unpredictable environments and providing more flexibility in post-production.

Built-in timecode for precise synchronization
DJI Mic 3 supports high-precision timecodes - the transmitter adds timecode directly to the recording, and the receiver allows for both input and output. Less than one frame shift in 24 hours means you can align multiple camera footage in an instant and edit faster.

Easy file export
After shooting, connect to a computer or phone with a USB-C cable - all internal recordings are transferred at once. You can also download files via the DJI Mimo app, so you can choose the method that suits you best.

Instant connection
Wide device compatibility. The receiver has multiple ports for creativity – a lockable 3.5mm TRS output for stable connection, a 3.5mm TRRS jack for live listening, and a USB-C port for simultaneous charging and recording. Quickly adapt to different devices with adapters.

Long battery life
The receiver works for up to 10 hours. The separately sold charging case provides approximately 2.4 additional charges – up to 28 hours of total operating time. Ideal for long shooting days and live broadcasts.

5-minute quick charge
Just 5 minutes of charging gives you up to 2 hours of use. 3C quick charge allows you to fully charge the entire set in approximately 50 minutes – so you can get back to work quickly.

Smart power saving

• Auto power off: Set the transmitter and receiver to turn off after a certain period of time on the receiver or in the DJI Mimo app. This saves battery life and extends operating time.
• Auto power on with camera: When enabled, the receiver will power on/off with the camera when connected via a 3.5mm cable or hot shoe.
• Use while charging: When connected via a phone, the receiver will draw power directly from the device. When connected to an additional power source via USB-C, it will charge both the receiver and the phone at the same time – no interruptions.